Branch: 59 Broad St, Barry

FIND US

59 Broad St, Bro Morgannwg,
Barry, The Vale of Glamorgan, CF62 7AG

0 £0.00
products in your basketto quote To basket
Ooops no items were found.
Try something else.
Ok
Loading…
0
Own Brand

WS58 50MM CROSS TEE 92' S/W

WS50
Starting from
£59.99 / EACH
/
excl. VAT
- +
Check stock in other branches
Your collection branch is 59 Broad St, Barry
Add to quick list
Compare
Own Brand

WS58 50MM CROSS TEE 92' S/W

Product Code: WS50
Solvent waste pipe tees serve two primary functions. The main use is to connect a section of waste pipe to an existing pipe run. The tee is designed with a sweep to ensure that the new section flows in the correct direction. In most kitchen and bathroom applications, the branch section typically drops into a main pipe run located below it. The second use of a tee is to create a 90-degree bend with access for cleaning. This is achieved by using an access plug at the opposite end of the swept tee and away from the direction of flow. Our solvent-weld waste systems are manufactured in the UK to BS EN 1455 standards and are kitemarked for quality assurance.
Solvent waste pipe tees serve two primary functions. The main use is to connect a section of waste pipe to an existing pipe run. The tee is designed with a sweep to ensure that the new section flows in the correct direction. In most kitchen and bathroom applications, the branch section typically drops into a main pipe run located below it. The second use of a tee is to create a 90-degree bend with access for cleaning. This is achieved by using an access plug at the opposite end of the swept tee and away from the direction of flow. Our solvent-weld waste systems are manufactured in the UK to BS EN 1455 standards and are kitemarked for quality assurance.

Specifications

Made In

GB

Width

1

Length

1

Depth

1

Brand

Own Brand

Categories

Pipe

Category

Solvent Weld 50mm

Length

ft

Thickness

in

Width

in

Solvent waste pipe tees serve two primary functions. The main use is to connect a section of waste pipe to an existing pipe run. The tee is designed with a sweep to ensure that the new section flows in the correct direction. In most kitchen and bathroom applications, the branch section typically drops into a main pipe run located below it. The second use of a tee is to create a 90-degree bend with access for cleaning. This is achieved by using an access plug at the opposite end of the swept tee and away from the direction of flow. Our solvent-weld waste systems are manufactured in the UK to BS EN 1455 standards and are kitemarked for quality assurance.

Specifications

Made In

GB

Width

1

Length

1

Depth

1

Brand

Own Brand

Categories

Pipe

Category

Solvent Weld 50mm

Length

ft

Thickness

in

Width

in

SEARCH ×